1Build semi-raw rubber treads onto buffed tire casings to prepare tires for vulcanization in recapping or retreading processes.(Core task)
2Trim excess rubber and imperfections during retreading processes.(Core task)
3Fill cuts and holes in tires, using hot rubber.(Core task)
4Place tires into molds for new tread.
5Fit inner tubes and final layers of rubber onto tires.
6Buff tires according to specifications for width and undertread depth.
7Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires.
8Start rollers that bond tread and plies as drums revolve.
9Align treads with guides, start drums to wind treads onto plies, and slice ends.
10Inspect worn tires for faults, cracks, cuts, and nail holes, and to determine if tires are suitable for retreading.
Top Skills Required
Operation and Control
Operations Monitoring
Active Listening
Critical Thinking
Monitoring
Judgment and Decision Making
Time Management
Speaking
Quality Control Analysis
Knowledge Areas
Production and ProcessingAdministration and ManagementMechanicalEnglish LanguageEngineering and TechnologyPublic Safety and SecurityEducation and TrainingCustomer and Personal Service
Technology & Tools Used
In-Demand Technologies
Microsoft ExcelMicrosoft Office softwareMicrosoft OutlookMicrosoft PowerPointMicrosoft ProjectMicrosoft WordSAP software